BCM43907 Datasheet, PDF (97/128 Pages) Cypress Semiconductor – WICED™ IEEE 802.11 a/b/g/n SoC with an Embedded Applications Processor

BCM43907 Preliminary Data Sheet
System Power Consumption
Section 16: System Power Consumption
Note: Values in this data sheet are design goals and are subject to change based on the results of
device characterization.
Note: Unless otherwise stated, these values apply for the conditions specified in
Table 18: “Recommended Operating Conditions and DC Characteristics,” on page 76.
WLAN Current Consumption
The tables in this subsection show the typical, total current used by the BCM43907. Current values may be
measured with the APPS core powered off. The first column of the table, the mode description, will state the
power condition of the APPS core.
2.4 GHz Mode
Table 37: 2.4 GHz Mode WLAN Current Consumption
Mode
VDDIO =
V_BAT = 3.6V ^a _{VDDIO_HIB = 3.3V} ^{a, b, c}
(µA)
(µA)
Sleep Modes
Radio off ^d
3
3
Sleep ^{e, f}
6
160
IEEE Power Save, DTIM=1, single RX, APPS powered down ^g
2180
160
IEEE Power Save, DTIM=3, single RX, APPS powered down ^h
680
160
IEEE Power Save, DTIM=9, single RX, APPS powered down
233
160
Active Modes
Continuous RX mode MCS7, HT20, 1SS, APPS powered up ^{i, j}
57,200
60
CRS-HT20, APPS powered up ^k
55,200
60
Continuous TX mode 1 Mbps, APPS powered up ^l
336,000
60
Continuous TX mode MCS7, HT20, 1SS, 1 TX, APPS powered up ^{l 337,900}
60
Ping Modes
Ping to associated access point ^l
Sleep
336,000
60
6
160
a. Typical silicon.
b. VIO is specified with all pins idle (not switching) and not driving any loads.
c. Excludes VDDIO_USB, VDDIO_RMII, VDDIO_I2S, and VDDIO_SD.
Broadcom^®
March 12, 2016 • 43907-DS104-R
BROADCOM CONFIDENTIAL
Page 96