W83977ATF Datasheet, PDF (42/207 Pages) Winbond – WINBOND I/O

DSKCHG (Bit 7):
This bit indicates the status of DSKCHG input.
Bit 6-4: These bits are always a logic 1 during a read.
DMAEN (Bit 3):
This bit indicates the value of DO REGISTER bit 3.
NOPREC (Bit 2):
This bit indicates the value of CC REGISTER NOPREC bit.
DRATE1 DRATE0 (Bit 1, 0):
These two bits select the data rate of the FDC.
W83977ATF
PRELIMINARY
2.2.9 Configuration Control Register (CC Register) (Write base address + 7)
This register is used to control the data rate. In the PC/AT and PS/2 mode, the bit definitions are as
follows:
7 6 5 ⁴ 3 ²¹ 0
xxxx xx
DRATE0
DRATE1
X: Reserved
Bit 7-2: Reserved. These bits should be set to 0.
DRATE1 DRATE0 (Bit 1, 0):
These two bits select the data rate of the FDC.
In the PS/2 Model 30 mode, the bit definitions are as follows:
76 5 43 ²¹ 0
XX XX X
X: Reserved
DRATE0
DRATE1
NOPREC
Bit 7-3: Reserved. These bits should be set to 0.
NOPREC (Bit 2):
This bit indicates no precompensation. It has no function and can be set by software.
DRATE1 DRATE0 (Bit 1, 0):
These two bits select the data rate of the FDC.
Publication Release Date: April 1998
-41 -
Revision 0.52