DS90UB925Q-Q1 Datasheet, PDF (35/51 Pages) Texas Instruments – 5 to 85 MHz 24-Bit Color FPD-Link III Serializer With Bidirectional Control Channel

www.ti.com
DS90UB925Q-Q1
SNLS407D – APRIL 2012 – REVISED OCTOBER 2014
Register Maps (continued)
ADD
(dec)
100
ADD
(hex)
0x64
REGISTER
NAME
Pattern
Generator
Control
Table 6. Serial Control Bus Registers (continued)
BIT(S)
7:4
3:1
0
REGIST
ER
TYPE
RW
RW
DEFAULT
(hex)
FUNCTION
DESCRIPTION
0x10
Pattern
Generator
Select
Pattern
Generator
Enable
Fixed Pattern Select
This field selects the pattern to output when in Fixed
Pattern Mode. Scaled patterns are evenly distributed
across the horizontal or vertical active regions. This
field is ignored when Auto-Scrolling Mode is enabled.
The following table shows the color selections in non-
inverted followed by inverted color mode
0000: Reserved
0001: White/Black
0010: Black/White
0011: Red/Cyan
0100: Green/Magenta
0101: Blue/Yellow
0110: Horizontally Scaled Black to White/White to
Black
0111: Horizontally Scaled Black to Red/Cyan to White
1000: Horizontally Scaled Black to Green/Magenta to
White
1001: Horizontally Scaled Black to Blue/Yellow to White
1010: Vertically Scaled Black to White/White to Black
1011: Vertically Scaled Black to Red/Cyan to White
1100: Vertically Scaled Black to Green/Magenta to
White
1101: Vertically Scaled Black to Blue/Yellow to White
1110: Custom color (or its inversion) configured in
PGRS, PGGS, PGBS registers
1111: Reserved
Reserved
Pattern Generator Enable
1: Enable Pattern Generator
0: Disable Pattern Generator
Copyright © 2012–2014, Texas Instruments Incorporated
Product Folder Links: DS90UB925Q-Q1
Submit Documentation Feedback
35