UPSD3212A Datasheet, PDF (91/163 Pages) STMicroelectronics – Flash Programmable System Devices with 8032 MCU with USB and Programmable Logic

uPSD3212A, uPSD3212C, uPSD3212CV
DEVELOPMENT SYSTEM
The uPSD3200 is supported by PSDsoft, a Win-
dows-based software development tool (Win-
dows-95, Windows-98, Windows-NT). A PSD
MODULE design is quickly and easily produced in
a point and click environment. The designer does
not need to enter Hardware Description Language
(HDL) equations, unless desired, to define PSD
MODULE pin functions and memory map informa-
tion. The general design flow is shown in Figure
47. PSDsoft is available from our web site (the ad-
dress is given on the back page of this data sheet)
or other distribution channels.
PSDsoft directly supports a low cost device pro-
grammer from ST: FlashLINK (JTAG). The pro-
grammer may be purchased through your local
distributor/representative. The uPSD3200 is also
supported by third party device programmers. See
our web site for the current list.
Figure 47. PSDsoft Express Development Tool
Choose µPSD
Define µPSD Pin and
Node Functions
Point and click definition of
PSD pin functions, internal nodes,
and MCU system memory map
Define General Purpose
Logic in CPLD
Point and click definition of combin-
atorial and registered logic in CPLD.
Access HDL is available if needed
C Code Generation
GENERATE C CODE
SPECIFIC TO PSD
FUNCTIONS
Merge MCU Firmware with
PSD Module Configuration
A composite object file is created
containing MCU firmware and
PSD configuration
MCU FIRMWARE
HEX OR S-RECORD
FORMAT
USER'S CHOICE OF
8032
COMPILER/LINKER
*.OBJ FILE
PSD Programmer
FlashLINK (JTAG)
*.OBJ FILE
AVAILABLE
FOR 3rd PARTY
PROGRAMMERS
AI07432
91/163