UPSD3212A Datasheet, PDF (104/163 Pages) STMicroelectronics – Flash Programmable System Devices with 8032 MCU with USB and Programmable Logic

uPSD3212A, uPSD3212C, uPSD3212CV
Separate Space Mode. Program space is sepa-
rated from Data space. For example, Program Se-
lect Enable (PSEN) is used to access the program
code from the primary Flash memory, while READ
Strobe (RD) is used to access data from the sec-
ondary Flash memory, SRAM and I/O Port blocks.
This configuration requires the VM Register to be
set to 0Ch (see Figure 51).
Combined Space Modes. The Program and
Data spaces are combined into one memory
space that allows the primary Flash memory, sec-
ondary Flash memory, and SRAM to be accessed
by either Program Select Enable (PSEN) or READ
Strobe (RD). For example, to configure the prima-
ry Flash memory in Combined space, Bits b2 and
b4 of the VM Register are set to '1' (see Figure 52).
Figure 51. Separate Space Mode
DPLD
RS0
CSBOOT0-1
FS0-FS3
PSEN
RD
Primary
Flash
Memory
CS
OE
Figure 52. Combined Space Mode
Secondary
Flash
Memory
CS
OE
SRAM
CS
OE
AI07433
RD
VM REG BIT 3
VM REG BIT 4
PSEN
VM REG BIT 1
VM REG BIT 2
VM REG BIT 0
DPLD
RS0
CSBOOT0-1
FS0-FS3
Primary
Flash
Memory
CS
OE
Secondary
Flash
Memory
CS
OE
SRAM
CS
OE
RD
AI07434
104/163