CD00191174 Datasheet, PDF (111/112 Pages) STMicroelectronics – High-density access line, ARM-based 32-bit MCU

STM32F101xC, STM32F101xD, STM32F101xE
Revision history
Table 66. Document revision history (continued)
Date
Revision
Changes
Number of DACs corrected in Table 3: STM32F101xx family.
I_{DD_VBAT} updated in Table 17: Typical and maximum current
consumptions in Stop and Standby modes.
24-Sep-2009
Figure 13: Typical current consumption on VBAT with RTC on vs.
7
temperature at different VBAT values added.
IEC 1000 standard updated to IEC 61000 and SAE J1752/3 updated to
IEC 61967-2 in Section 5.3.11: EMC characteristics on page 77.
Table 59: DAC characteristics modified.
Small text changes.
19-Apr-2011
Updated footnotes below Table 7: Voltage characteristics on page 36
and Table 8: Current characteristics on page 37
Updated tw min in Table 21: High-speed external user clock
characteristics on page 50
Updated startup time in Table 24: LSE oscillator characteristics (fLSE =
32.768 kHz) on page 53
Updated Table 31: Asynchronous non-multiplexed SRAM/PSRAM/NOR
read timings on page 58
8
Updated FSMC sync data latency in Figure 25 thru Figure 28
Updated Figure 38: NAND controller waveforms for common memory
write access and Table 40: Switching characteristics for NAND Flash
read and write cycles on page 76
Updated Figure 44: Recommended NRST pin protection
Added Section 5.3.13: I/O current injection characteristics
Updated Section 5.3.13: I/O current injection characteristics
Updated note 2 in Table 51: I2C characteristics on page 87
Updated Figure 45: I2C bus AC waveforms and measurement circuit(1)
Doc ID 14610 Rev 8
111/112