SI5345_16 Datasheet, PDF (21/60 Pages) Silicon Laboratories – 10-Channel, Any-Frequency, Any-Output Jitter Attenuator/ Clock Multiplier

Si5345/44/42 Rev D Data Sheet
Functional Description
Once you receive the updated design file, simply open it in CBPro. The device will begin operation after startup with the values in the
NVM file. The flowchart for this process is shown in the following figure.
Start
End: Place
sample order
Do I need a
pre-programmed device with
a feature or setting which is
unavailable in ClockBuilder
Pro?
No
Configure device
using CBPro
Generate
Custom OPN
in CBPro
Yes
Contact Silicon Labs
Technical Support
to submit & review
Yes
your
non- standard
configuration
request & CBPro
project file
Receive
updated CBPro
project file
from
Silicon Labs
with “Settings
Override”
Load project file
into CBPro and test
Does the updated
CBPro Project file
match your
requirements?
Figure 3.17. Process for Requesting Non-Standard CBPro Features
Note: Contact Silicon Labs Technical Support at www.silabs.com/support/Pages/default.aspx.
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.0 | 20