RX21A_15 Datasheet, PDF (59/132 Pages) Renesas Technology Corp – Renesas MCUs

RX21A Group
5. Electrical Characteristics
Table 5.6 DC Characteristics (5)
Conditions: VCC = AVCC0 = AVCCA = 2.7 to 3.6 V, VSS = AVSS0 = AVSSA = VREFL = VREFL0 = VREFDSL = 0 V,
T_a = –40 to +105°C
Item
Symbol Typ.
Max.
Unit
Test
Conditions
Supply High-speed
Normal operating No peripheral
ICLK = 50 MHz I_CC
8.6
— mA
current*¹ operating mode mode
operation*³
All peripheral
operation:
Normal*⁴
ICLK = 50 MHz
13
—
All peripheral
operation:
Max.*⁵
ICLK = 50 MHz
—
59
Sleep mode
No peripheral
operation
ICLK = 50 MHz
4.9
—
All peripheral
operation:
Normal
ICLK = 50 MHz
9.0
—
All-module clock stop mode
ICLK = 50 MHz
3.9
—
Increase during BGO operation*²
23
—
Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when internal pull-up MOSs
are in the off state.
Note 2. This is the increase if data is programmed to or erasing from the ROM or E2 DataFlash during program execution.
Note 3. Clock supply to the peripheral functions is stopped. This does not include BGO operation. The clock source is HOCO. FCLK and
PCLK are set to divided by 64.
Note 4. Clocks are supplied to the peripheral functions. This does not include BGO operation. The clock source is HOCO. FCLK and
PCLK are set to divided by 64.
Note 5. Clocks are supplied to the peripheral functions. This does not include BGO operation. The clock source is PLL. PCLKA is ICLK
divided by 1. FCLK, PCLKB, PCLKC, and PCLKD are ICLK divided by 2.
R01DS0129EJ0110 Rev.1.10
Aug 28, 2014
Page 59 of 132