MC68HC705P6A Datasheet, PDF (118/130 Pages) Motorola, Inc – HCMOS Microcontroller Unit

Electrical Specifications
The MCU contains circuitry to protect the inputs against damage from
high static voltages; however, do not apply voltages higher than those
shown in the table below. Keep V_In and V_Out within the range
V_SS ≤ (V_In or V_Out) ≤ V_DD. Connect unused inputs to the appropriate
voltage level, either V_SS or V_DD.
NOTE:
Supply voltage
Rating⁽¹⁾
Input voltage
Bootloader mode (IRQ/V_PP pin only)
Current drain per pin excluding V_DD and V_SS
Storage temperature range
1. Voltages are referenced to V_SS.
Symbol
V_DD
V_In
V_In
I
T_stg
Value
–0.3 to +7.0
V_SS –0.3 to
V_DD +0.3
V_SS –0.3 to
2 x V_DD +0.3
25
–65 to +150
Unit
V
V
V
mA
°C
This device is not guaranteed to operate properly at the maximum
ratings. Refer to 14.6 5.0-Volt DC Electrical Characteristics and
14.7 3.3-Volt DC Electrical Charactertistics for guaranteed operating
conditions.
14.4 Operating Temperature Range
Characteristic
Operating temperature range
MC68HC705P6A (standard)
MC68HC705P6AC (extended)
Symbol
T_A
Value
Unit
T_L to T_H
0 to +70
°C
–40 to +85
14.5 Thermal Characteristics
Characteristic
Thermal resistance
PDIP
SOIC
Symbol
θ_JA
Value
60
60
Unit
°C/W
Advance Information
118
Electrical Specifications
MC68HC705P6A — Rev. 2.0
MOTOROLA