MC68HC908RK2 Datasheet, PDF (104/232 Pages) Motorola, Inc – Microcontroller Unit

Break Module (BRK)
7.4.3 TIM During Break Interrupts
A break interrupt stops the timer counter.
7.4.4 COP During Break Interrupts
The COP is disabled during a break interrupt when V_HI is present on the
RST pin.
7.5 Low-Power Modes
The WAIT and STOP instructions put the MCU in low power-
consumption standby modes.
7.5.1 Wait Mode
If enabled, the break module is active in wait mode.
7.5.2 Stop Mode
The break module is inactive in stop mode. The STOP instruction does
not affect break module register states.
7.6 Break Module Registers
These registers control and monitor operation of the break module:
• Break status and control register, BSCR
• Break address register high, BRKH
• Break address register low, BRKL
Advance Information
104
Break Module (BRK)
MC68HC908RK2 — Rev. 4.0
MOTOROLA