|
SDA9380-B21 Datasheet, PDF (9/72 Pages) Micronas – EDDC Enhanced Deflection Controller and RGB Processor | |||
|
◁ |
SDA 9380 - B21
Preliminary Data Sheet
General description
1 General description
The SDA 9380 is a highly integrated deflection controller and RGB video processor for CTV receiv-
ers with 15 to 19kHz or 31 to 38kHz line frequencies. The deflection component controls among oth-
ers an horizontal drive2001-01-29r circuit for a flyback line output stage, a DC coupled vertical saw-
tooth output stage and an East-West raster correction circuit. All adjustable output parameters are
I²C-Bus controlled. Inputs are HSYNC and VSYNC. The HSYNC signal is the reference for the inter-
nal clock system which includes the=Φ1=and Φ2=control loops.
The RGB processor has two YUV/RGB inputs and one RGB input. One YUV/RGB input and the
RGB input are for SVGA and text/OSD with fast blanking. The RGB output stage has two control
loops for cut off and white level with halt capability in vertical shrink modes. An overall Y output and
an adjustable delay of the RGB outputs related to this signal are suitable for a scan velocity modula-
tion circuit.
The supply voltages of the IC are 3.3V and 8V. It is mounted in a P-MQFP package with 64 pins.
2 Features
2.1 Deflection
⢠=No external clock needed
⢠=Φ1=PLL and=Φ2=PLL on chip
â¢= =Standard line frequencies for NTSC and PAL
â¢= =18.75kHz line frequency for 625 lines/60 Hz
â¢= =Doubled line frequencies for NTSC and PAL, MUSE standard, DTV standard
⢠Also suitable for VGA, Macintosh (35kHz) and SVGA standard (38kHz, 800*600*60Hz)
⢠=Automatic switching between 31, 35 and 38kHz in Monitor mode with 2 digital outputs for
controlling B+ and 1 analog input to keep watch on it
⢠=I²C-Bus alignment of all deflection parameters
⢠=All EW-, V- and H- functions
⢠=Picture width and picture height EHT compensation
⢠=Dynamic PH EHT compensation (white bar)
⢠=Compensation of H-phase deviation (e.g. caused by white bar)
⢠=Upper/lower EW-corner correction separately adjustable
⢠=Extreme EW-corner correction (coefficient of sixth order) for super flat tubes
⢠=V-angle and V-bow correction
⢠=Two special control items for vertical zoom/shrink and scroll function with absolutely
correct tracking of the E/W and HD-output signals
⢠=No re-adjustment of E/W after changing vertical S-correction and linearity needed
⢠=H-frequent PWM output signal for generating an adjustable vertical frequent parabola or
a constant pulse width, selectable by I²C
⢠=H- and V-blanking time adjustable
⢠=Partial overscan adjustable to hide the cut off control measuring lines in the reduced
scan modes
⢠=Self adaptation of V-frequency / number of lines per field between 192 and 680 for
each possible line frequency
⢠=Selectable Black Switch-Off behaviour via I²C-Bus
Micronas
1-1
2001-01-29
|
▷ |