LAN8810 Datasheet, PDF (51/83 Pages) Microchip Technology – GMII 10/100/1000 Ethernet Transceiver

LAN8810/LAN8810I
Bits
Description
3
INT3
0 = Not source of interrupt
1 = Auto-Negotiation LP Acknowledged
2
INT2
0 = Not source of interrupt
1 = Parallel Detection Fault or Master/Slave Configuration Fault
1
INT1
0 = Not source of interrupt
1 = Auto-Negotiation Page Received
0
RESERVED
Type
LH/WC
Default
0b
LH/WC
0b
LH/WC
0b
RO
-
Note: Refer to Section 3.5, "Interrupt Management," on page 21 for additional information.
4.2.21 INTERRUPT MASK REGISTER
Index (In Decimal): 30
Size:
16 bits
Bits
15:11
10
9
8
7
6
5
4
Description
RESERVED
INT10_EN
Transmitter Elastic Buffer Overflow interrupt enable.
0 = interrupt source is masked
1 = interrupt source is enabled
INT9_EN
Transmitter Elastic Buffer Underflow interrupt enable.
0 = interrupt source is masked
1 = interrupt source is enabled
INT8_EN
Idle Error Count Overflow interrupt enable.
0 = interrupt source is masked
1 = interrupt source is enabled
INT7_EN
ENERGYON interrupt enable
0 = interrupt source is masked
1 = interrupt source is enabled
INT6_EN
Auto-Negotiation interrupt enable
0 = interrupt source is masked.
1 = interrupt source is enabled.
INT5_EN
Remote Fault Detected interrupt enable.
0 = interrupt source is masked.
1 = interrupt source is enabled.
INT4_EN
Link Down (Link status negated) interrupt enable.
0 = interrupt source is masked.
1 = interrupt source is enabled.
 2009-2015 Microchip Technology Inc.
Type
RO
R/W
Default
-
0b
R/W
0b
R/W
0b
R/W
0b
R/W
0b
R/W
0b
R/W
0b
DS00001870B-page 50