PIC24FV16KM204 Datasheet, PDF (277/336 Pages) Microchip Technology – General Purpose, 16-Bit Flash Microcontroller with XLP Technology Data Sheet

PIC24FV16KM204 FAMILY
TABLE 27-15: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Operating Conditions: -40°C < TA < +85°C (unless otherwise stated)
-40°C  TA  +125°C for Extended
Param
No.
Symbol
Characteristics
Min
Typ
Max Units
Comments
VBG
TBG
VRGOUT
CEFC
Band Gap Reference Voltage
Band Gap Reference
Start-up Time
Regulator Output Voltage
External Filter Capacitor Value
VLVR
Low-Voltage Regulator Output
Voltage
0.973
—
3.1
4.7
—
1.024
1
3.3
10
2.6
1.075 V
— ms
3.6 V
— F Series resistance < 3 Ohm
recommended;
< 5 Ohm is required.
—
V
TABLE 27-16: CTMU CURRENT SOURCE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (PIC24F16KM204)
2.0V to 5.5V (PIC24FV16KM204)
Operating temperature
-40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Sym
Characteristic
Min Typ⁽¹⁾ Max Units
Comments
Conditions
IOUT1 CTMU Current
— 550 —
Source, Base Range
nA CTMUCON1L<1:0> = 01
IOUT2 CTMU Current
— 5.5 — A CTMUCON1L<1:0> = 10
Source, 10x Range
IOUT3 CTMU Current
—
55
—
A CTMUCON1L<1:0> = 11 ^{2.5V < VDD < VDDMAX}
Source, 100x Range
IOUT4 CTMU Current
— 550 —
Source, 1000x Range
A CTMUCON1L<1:0> = 00
(Note 2)
VF Temperature Diode
Forward Voltage
— .76 — V
V Voltage Change per
Degree Celsius
— 1.6 — mV/°C
Note 1: Nominal value at the center point of the current trim range (CTMUCON1L<7:2> = 000000). On PIC24F16KM
parts, the current output is limited to the typical current value when IOUT4 is chosen.
2: Do not use this current range with a temperature sensing diode.
 2013 Microchip Technology Inc.
Advance Information
DS33030A-page 277