PIC24FV16KM204 Datasheet, PDF (139/336 Pages) Microchip Technology – General Purpose, 16-Bit Flash Microcontroller with XLP Technology Data Sheet

PIC24FV16KM204 FAMILY
REGISTER 11-2: ANSB: ANALOG SELECTION (PORTB)
R/W-1
R/W-1
R/W-1
R/W-1
U-0
ANSB15
ANSB14
ANSB13
ANSB12
—
bit 15
U-0
R/W-1
R/W-1
—
ANSB9
ANSB8
bit 8
R/W-1
ANSB7
bit 7
R/W-1
ANSB6⁽¹⁾
R/W-1
ANSB5⁽¹⁾
R/W-1
ANSB4
R/W-1
ANSB3⁽¹⁾
R/W-1
ANSB2
R/W-1
ANSB1
R/W-1
ANSB0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-12
bit 11-10
bit 9-0
ANSB<15:12>: Analog Select Control bits
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
Unimplemented: Read as ‘0’
ANSB<9:0>: Analog Select Control bits⁽¹⁾
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
Note 1: The ANSB<6:5,3> bits are not available on 20-pin devices.
REGISTER 11-3: ANSC ANALOG SELECTION (PORTC)
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
R/W-1
R/W-1
R/W-1
—
—
—
—
—
ANSC2^(1,2) ANSC1^(1,2) ANSC0^(1,2)
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-3
bit 2-0
Unimplemented: Read as ‘0’
ANSC<2:0>: Analog Select Control bits^(1,2)
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
Note 1: These bits are not implemented in 20-pin devices.
2: These bits are not implemented in 28-pin devices.
 2013 Microchip Technology Inc.
Advance Information
DS33030A-page 139