PIC24FV16KM204 Datasheet, PDF (235/336 Pages) Microchip Technology – General Purpose, 16-Bit Flash Microcontroller with XLP Technology Data Sheet

PIC24FV16KM204 FAMILY
22.0 COMPARATOR MODULE
Note:
This data sheet summarizes the features
of this group of PIC24F devices. It is not
intended to be a comprehensive refer-
ence source. For more information on the
Comparator module, refer to the “PIC24F
Family Reference Manual”, Section 46.
“Scalable Comparator Module”
(DS39734).
The comparator module provides three dual input
comparators. The inputs to the comparator can be
configured to use any one of four external analog
inputs, as well as a voltage reference input from either
the internal band gap reference, divided by 2 (VBG/2),
or the comparator voltage reference generator.
The comparator outputs may be directly connected to
the CxOUT pins. When the respective COE bit equals
‘1’, the I/O pad logic makes the unsynchronized output
of the comparator available on the pin.
A simplified block diagram of the module is shown in
Figure 22-1. Diagrams of the possible individual
comparator configurations are shown in Figure 22-2.
Each comparator has its own control register,
CMxCON (Register 22-1), for enabling and configuring
its operation. The output and event status of all three
comparators is provided in the CMSTAT register
(Register 22-2).
FIGURE 22-1:
COMPARATOR MODULE BLOCK DIAGRAM
CCH<1:0>
CREF<1:0>
CXINB
CXINC
CXIND
VBG/2
Input
Select
Logic
VIN-
VIN+ ^C1
VIN-
VIN+ ^C2
EVPOL<1:0>
CPOL
Trigger/Interrupt
Logic
CEVT
COE
EVPOL<1:0>
CPOL
Trigger/Interrupt
Logic
C1OUT
COUT
Pin
CEVT
COE
C2OUT
COUT
Pin
CXINA
CVREF
VIN-
VIN+ ^C3
EVPOL<1:0>
CPOL
Trigger/Interrupt
Logic
CEVT
COE
C3OUT
COUT
Pin
 2013 Microchip Technology Inc.
Advance Information
DS33030A-page 235