PIC24FV16KM204 Datasheet, PDF (148/336 Pages) Microchip Technology – General Purpose, 16-Bit Flash Microcontroller with XLP Technology Data Sheet

PIC24FV16KM204 FAMILY
13.5 Auxiliary Output
The MCCP and SCCP modules have an auxiliary (sec-
ondary) output that provides other peripherals access
to internal module signals. The auxiliary output is
intended to connect to other MCCP or SCCP modules,
or other digital peripherals, to provide these types of
functions:
• Time Base Synchronization
• Peripheral Trigger and Clock Inputs
• Signal Gating
The type of output signal is selected using the
AUXOUT<1:0> control bits (CCPxCON2H<4:3>). The
type of output signal is also dependent on the module
operating mode.
On the PIC24FV16KM204 family of parts, the following
modules have access to the auxiliary output signal:
• CTMU
TABLE 13-4: AUXILIARY OUTPUT
AUXOUT<1:0> CCSEL MOD<3:0>
Comments
00
x
xxxx Auxiliary output disabled
01
0
0000 Time Base modes
10
11
01
0
0001 Output Compare modes
10
through
11
1111
01
1
xxxx Input Capture modes
10
11
Signal Description
No Output
Time Base Period Reset or Rollover
Special Event Trigger Output
No Output
Time Base Period Reset or Rollover
Output Compare Event Signal
Output Compare Signal
Time Base Period Reset or Rollover
Reflects the Value of the ICDIS bit
Input Capture Event Signal
DS33030A-page 148
Advance Information
 2013 Microchip Technology Inc.