English
Language : 

X9000 Datasheet, PDF (30/77 Pages) Intel Corporation – Core2 Duo Processor and Core2 Extreme Processor on 45-nm Process
Electrical Specifications
3.10 Processor DC Specifications
Table 6.
Symbol
VCCHFM
VCCLFM
VCCSLFM
VCC,BOOT
VCCP
VCCA
VCCDPRSLP
VDC4
VC6
ICCDES
ICC
IAH,
ISGNT
ISLP
IDSLP
IDPRSLP
IDC4
IC6
The processor DC specifications in this section are defined at the processor
core (pads) unless noted otherwise. See Table 4 for the pin signal definitions and
signal pin assignments.
Table 6 through Table 11 list the DC specifications for the processor and are valid only
while meeting specifications for junction temperature, clock frequency, and input
voltages. The Highest Frequency Mode (HFM) and Lowest Frequency Mode (LFM) refer
to the highest and lowest core operating frequencies supported on the processor. Active
mode load line specifications apply in all states except in the Deep Sleep and Deeper
Sleep states. VCC,BOOT is the default voltage driven by the voltage regulator at power
up in order to set the VID values. Unless specified otherwise, all specifications for the
processor are at TJ = 105°C. Read all notes associated with each parameter.
Voltage and Current Specifications for the Extreme Edition Processors (Sheet
1 of 2)
Parameter
VCC at Highest Frequency Mode (HFM)
VCC at Lowest Frequency Mode (LFM)
VCC at Super Low Frequency Mode (Super LFM)
Default VCC Voltage for Initial Power-Up
AGTL+ Termination Voltage
PLL Supply Voltage
VCC at Deeper Sleep
VCC at Intel® Enhanced Deeper Sleep state
VCC at Deep Power-Down Technology
ICC for Processors Recommended Design Target
ICC for Processors
Processor
Number
Core Frequency/Voltage
X9000
2.8 GHz & VCCHFM
1.2 GHz & VCCLFM
0.8 GHz & VCCSLFM
ICC Auto-Halt & Stop-Grant
HFM
SuperLFM
ICC Sleep
HFM
SuperLFM
ICC Deep Sleep
HFM
SuperLFM
ICC Deeper Sleep
ICC Intel Enhanced Deeper Sleep
ICC Deep Power-Down Technology
Min
1.0
0.85
0.8
Typ
Max
1.275
1.10
1.0
—
1.200
—
1.000
1.425
0.65
0.60
0.35
—
—
1.050
1.500
—
—
1.100
1.575
0.85
0.85
0.70
59
—
—
—
—
57
—
—
34
26
—
—
27.3
18.3
—
—
26.5
18.1
—
—
24.5
17.6
—
—
12.2
—
—
11.7
—
—
11.0
Unit
V
V
V
V
V
V
V
V
V
A
Notes
1, 2
1, 2
1, 2
2, 5, 6,
7
1, 2
1, 2
1, 2
A
3, 4,
10, 12
A
3, 4,
10
A
3, 4,
10
A
3, 4,
10
A
3, 4
A
3, 4
A
3, 4
30
Datasheet