ICS1893 Datasheet, PDF (125/152 Pages) Integrated Circuit Systems – 3.3-V 10Base-T/100Base-TX Integrated PHYceiver™

ICS1893 - Release
Chapter 10 DC and AC Operating Conditions
10.4 DC Operating Characteristics
This section lists the ICS1893 DC operating characteristics.
10.4.1 DC Operating Characteristics for Supply Current
Table 10-4 lists the DC operating characteristics for the supply current to the ICS1893 under various
conditions.
Note: All VDD_IO measurements are taken with respect to VSS (which equals 0 V).
Table 10-4. DC Operating Characteristics for Supply Current
Parameter
Supply Current†
Operating Mode
100Base-TX‡
Supply Current† 10Base-T‡
Supply Current† Auto-Negotiation
Supply Current† Power-Down
Supply Current† Reset
Symbol
IDD_IO
IDD
IDD_IO
IDD
IDD_IO
IDD
IDD_IO
IDD
IDD
Min.
–
–
–
–
–
–
–
–
–
Typ.
8
110
5
150
5
80
3
40
50
Max.
11
125
8
160
8
90
5
50
60
Units
mA
mA
mA
mA
mA
mA
mA
mA
mA
† These supply current parameters are measured through VDD pins to the ICS1893. The supply current
parameters include external transformer currents.
‡ Measurements taken with 100% data transmission and the minimum inter-packet gap.
10.4.2 DC Operating Characteristics for TTL Inputs and Outputs
Table 10-5 lists the 3.3-V DC operating characteristics of the ICS1893 TTL inputs and outputs.
Note: All VDD_IO measurements are taken with respect to VSS (which equals 0 V).
Table 10-5. 3.3-V DC Operating Characteristics for TTL Inputs and Outputs
Parameter
TTL Input High Voltage
TTL Input Low Voltage
TTL Output High Voltage
TTL Output Low Voltage
TTL Driving CMOS,
Output High Voltage
TTL Driving CMOS,
Output Low Voltage
Symbol
Conditions
V_IH VDD_IO = 3.47 V
–
V_IL VDD_IO = 3.47 V
–
V_OH VDD_IO = 3.14 V I_OH = –4 mA
V_OL VDD_IO = 3.14 V I_OL = +4 mA
V_OH VDD_IO = 3.14 V I_OH = –4 mA
Min.
2.0
–
2.4
–
2.4
Max.
–
0.8
–
0.4
–
Units
V
V
V
V
V
V_OL VDD_IO = 3.14 V I_OL = +4 mA
–
0.4
V
ICS1893 Rev C 6/6/00
Copyright © 2000, Integrated Circuit Systems, Inc.
All rights reserved.
125
June, 2000