MC9S12XF512_1 Datasheet, PDF (58/1306 Pages) Freescale Semiconductor, Inc – S12X Microcontrollers

Chapter 1 MC9S12XF-Family Reference Manual
1.2.8.16 PH6 / TXE_B — Port H I/O
PH6 is a general purpose input or output pin. It can be configured as FlexRay TXEN_B pin which indicates
to the Bus Driver that the FlexRay module is attempting to transmit data on channel B.
1.2.8.17 PH5 / TXD_B — Port H I/O
PH5 is a general purpose input or output pin. It can be configured as FlexRay data transmit channel B.
1.2.8.18 PH4 / RXD_B — Port H I/O
PH4 is a general purpose input or output pin. It can be configured as FlexRay data receive channel B.
1.2.8.19 PH3 — Port H I/O
PH3 is a general purpose input or output pin.
1.2.8.20 PH2 / TXE_A — Port H I/O
PH6 is a general purpose input or output pin. It can be configured as FlexRay TXEN_A pin which indicates
to the Bus Driver that the FlexRay module is attempting to transmit data on channel A.
1.2.8.21 PH1 / TXD_A — Port H I/O
PH1 is a general purpose input or output pin. It can be configured as FlexRay data transmit channel A.
1.2.8.22 PH0 / RXD_A — Port H I/O
PH0 is a general purpose input or output pin. It can be configured as FlexRay data receive channel A.
1.2.8.23 PJ7 — PORT J I/O
PJ7 is a general purpose input or output pin.
1.2.8.24 PJ6 / STB3 — PORT J I/O
PJ6 is a general purpose input or output pin. It can be configured as FlexRay Strobe Signal 3 (STB3).
1.2.8.25 PJ5 / STB2 — PORT J I/O
PJ5 is a general purpose input or output pin. It can be configured as FlexRay Strobe Signal 2 (STB2).
1.2.8.26 PJ4 / STB1— PORT J I/O
PJ4 is a general purpose input or output pin. It can be configured as FlexRay Strobe Signal 1 (STB1).
1.2.8.27 PJ3 / STB0 — PORT J I/O
PJ4 is a general purpose input or output pin. It can be configured as FlexRay Strobe Signal 1 (STB0).
MC9S12XF - Family Reference Manual, Rev.1.19
58
Freescale Semiconductor