MC68HC08LT8 Datasheet, PDF (114/156 Pages) Freescale Semiconductor, Inc – Microcontrollers

Keyboard Interrupt Module (KBI)
11.5.1 Keyboard Status and Control Register
• Flags keyboard interrupt requests
• Acknowledges keyboard interrupt requests
• Masks keyboard interrupt requests
• Controls keyboard interrupt triggering sensitivity
Address: $001B
Bit 7
Read: 0
Write:
Reset: 0
6
5
0
0
0
0
= Unimplemented
4
3
2
1
Bit 0
0
KEYF
0
IMASKK MODEK
ACKK
0
0
0
0
0
Figure 11-3. Keyboard Status and Control Register (KBSCR)
KEYF — Keyboard Flag Bit
This read-only bit is set when a keyboard interrupt is pending on port A. Reset clears the KEYF bit.
1 = Keyboard interrupt pending
0 = No keyboard interrupt pending
ACKK — Keyboard Acknowledge Bit
Writing a logic 1 to this write-only bit clears the keyboard interrupt request on port A. ACKK always
reads as logic 0. Reset clears ACKK.
IMASKK— Keyboard Interrupt Mask Bit
Writing a logic 1 to this read/write bit prevents the output of the keyboard interrupt mask from
generating interrupt requests on port A. Reset clears the IMASKK bit.
1 = Keyboard interrupt requests masked
0 = Keyboard interrupt requests not masked
MODEK — Keyboard Triggering Sensitivity Bit
This read/write bit controls the triggering sensitivity of the keyboard interrupt pins on port A. Reset
clears MODEK.
1 = Keyboard interrupt requests on falling edges and low levels
0 = Keyboard interrupt requests on falling edges only
MC68HC08LT8 Data Sheet, Rev. 1
114
Freescale Semiconductor