MC80F0424 Datasheet, PDF (13/135 Pages) List of Unclassifed Manufacturers – 8-BIT SINGLE-CHIP MICROCONTROLLERS

Preliminary
MC80F0424/0432/0448
5. PIN FUNCTION
V_DD: Supply voltage.
V_SS: Circuit ground.
AV_DD: Supply voltage to the ladder resistor of ADC circuit.
AV_SS: ADC circuit ground.
RESET: Reset the MCU.
X_IN: Input to the inverting oscillator amplifier and input to the in-
ternal main clock operating circuit.
X_OUT: Output from the inverting oscillator amplifier.
R00~R07: R0 is an 8-bit CMOS bidirectional I/O port. R0 pins
with 1 or 0 written to the R0 Port Direction Register R0IO can be
used as outputs or inputs. The internal pull-up resistor can be con-
nected by using the pull-up selection register 0 (PU0).
R10~R17: R1 is an 8-bit CMOS bidirectional I/O port. R1 pins
with 1 or 0 written to the R1 Port Direction Register R1IO can be
used as outputs or inputs. The internal pull-up resistor can be con-
nected by using the pull-up selection register 1 (PU1).
In addition, R1 serves the functions of the various following spe-
cial features such as INT0 (External interrupt 0), INT1 (External
interrupt 1), INT2 (External interrupt 2), BUZO (Buzzer driver
output), T0O (Timer 0 output), EC0 (Event counter input 0).
R20~R23: R2 is an 4-bit CMOS bidirectional I/O port. R2 pins
with 1 or 0 written to the R2 Port Direction Register R2IO can be
used as outputs or inputs.
In addition, R2 serves the functions of the various following spe-
cial features such as SX_IN (Sub clock input), SX_OUT (Sub clock
output).
R30~R37: R3 is an 8-bit CMOS bidirectional I/O port. R3 pins
with 1 or 0 written to the R3 Port Direction Register R3IO can be
used as outputs or inputs. R3 operates as the high current output
port with typical 20mA at low level output.
In addition, R3 serves the functions of the various following spe-
cial features such as ACLK1 (UART1 Asynchronous serial clock
input), RxD1 (UART1 data input), TxD1 (UART1 data output)
R40~R47: R4 is an 8-bit CMOS bidirectional I/O port. R4 pins
with 1 or 0 written to the R4 Port Direction Register R4IO can be
used as outputs or inputs. The internal pull-up resistor can be con-
nected by using the pull-up selection register 4 (PU4).
In addition, R4 serves the functions of the various following spe-
cial features such as SCK (Serial clock), SI (Serial data input), SO
(Serial data output), ACLK0 (UART0 Asynchronous serial clock
input), RxD0 (UART0 data input), TxD0 (UART0 data output).
R50~R54: R5 is an 5-bit CMOS bidirectional I/O port. R5 pins
with 1 or 0 written to the R5 Port Direction Register R5IO can be
used as outputs or inputs.
In addition, R5 serves the functions of the various following spe-
cial features such as INT3 (External interrupt 3), EC1 (Event
counter input 1), T2O (Timer 2 output), PWM1O (PWM 1 out-
put) / T1O (Timer 1 compare output), PWM3O (PWM 3 output)
/ T3O (Timer 3 compare output).
R60~R67: R6 is an 8-bit CMOS bidirectional I/O port. R6 pins
with 1 or 0 written to the R6 Port Direction Register R6IO can be
used as outputs or inputs.
In addition, R6 serves the functions of the ADC analog input port
AN[7:0].
R70~R77: R7 is an 8-bit CMOS bidirectional I/O port. R7 pins
with 1 or 0 written to the R7 Port Direction Register R7IO can be
used as outputs or inputs. The internal pull-up resistor can be con-
nected by using the pull-up selection register 7 (PU7).
In addition, R7 serves the functions of the ADC analog input port
AN[15:8].
MAR. 2005 Ver 0.2
9