MC80F0424 Datasheet, PDF (121/135 Pages) List of Unclassifed Manufacturers – 8-BIT SINGLE-CHIP MICROCONTROLLERS

Preliminary
MC80F0424/0432/0448
27. IN-SYSTEM PROGRAMMING (ISP)
27.1 Getting Started / Installation
The following section details the procedure for accomplishing the
installation procedure.
1. Connect the serial(RS-232C) cable between a target
board and the COM port of your PC.
2. Configure the COM port of your PC as following.
Baudrate
Data bit
Parity
Stop bit
Flow control
115,200
8
No
1
No
27.2 Basic ISP S/W Information
3. Turn your target B/D power switch ON. Your target B/
D must be configured to enter the ISP mode.
4. Run the MagnaChip ISP software.
5. Press the Reset Button in the ISP S/W. If the status win-
dows shows a message as "Connected", all the condi-
tions for ISP are provided.
MAR. 2005 Ver 0.2
117