NT68520XF Datasheet, PDF (42/97 Pages) List of Unclassifed Manufacturers – XGA,SXGA Flat Panel Monitor Controller

NT68520X,E
D1 BURST_MODE Auto Phase/Histogram calibration is working in burst or single mode
0: single
1: burst
D0 AUTO_PH_EN Auto Phase/Histogram Start Enable
(W)
0: Disable
1: Enable
D0 AUTO_PH_RE Auto Phase/Histogram calibration Ready
ADY(R)
0: Ready
1: Not Ready
Default：XX00 0000B
21H: Auto Phase/Histogram Calibration result BYTE 3 (Low Byte) (R)
Bits Name
Description
D7- AUTO_PH_B3 Auto Phase/Histogram calibration result BYTE 3
0
Default：XXXX XXXXB
22H: Auto Phase/Histogram Calibration result BYTE 2 (R)
Bits Name
Description
D7- AUTO_PH_B2 Auto Phase/Histogram calibration result BYTE 2
0
Default：XXXX XXXXB
23H: Auto Phase/Histogram Calibration result BYTE 1 (R)
Bits Name
Description
D7- AUTO_PH_B1 Auto Phase/Histogram calibration result BYTE 1
0
Default：XXXX XXXXB
24H: Auto Phase/Histogram Calibration result BYTE 0 (High Byte) (R)
Bits Name
Description
D7- AUTO_PH_B0 Auto Phase/Histogram calibration result BYTE 0
0
Default：XXXX XXXXB
25H: Auto Phase Red/Green Difference Mask (R/W)
Bits Name
Description
D7
Reserved
D6- PH_G_MASK Auto Phase Green difference mask, the difference will be masked before
4
summation.
D3
Reserved
2003/4/15
42
Ver.1.0