|
NT68520XF Datasheet, PDF (4/97 Pages) List of Unclassifed Manufacturers – XGA,SXGA Flat Panel Monitor Controller | |||
|
◁ |
NT68520X,E
FEATURES
VGA Front End
⦠Built-in triple high-speed ADC, PLL, and pre-amplifier for analog RGB input
⦠Support both non-interlaced and interlaced RGB graphic input signals
⦠Internal generated programmable clamping pulse
⦠Gain control for input signal ranging from 0.5V~1.0V
⦠Support 32 steps of phase adjust
⦠ADC sampling rate up to 110 MHz for X type and135 MHz for E type
⦠VGA input resolution up to XGA 1024x768@75 for X type and SXGA
1280x1024@75Hz for E type
YUV Front End
⦠Support ITU-R BT.656 8-bit Input
⦠Built-in YUV to RGB color space converter
Video Processor
⦠Flexible de-interlacing unit for VGA and digital YUV video input data
⦠Independent Horizontal and Vertical zoom in/out algorithm
⦠Enhanced interpolation algorithm for optimal image quality
⦠RGB offset control for brightness adjust
⦠RGB gain control for contrast adjust
⦠8-bit programmable gamma table for panel compensation
⦠Dithering function supports 24-bit quality for 18-bit panel
⦠Auto-calibration function for quick video centering, clock adjust, and phase adjust
Sync Processor
⦠Signal type accepts separate, composite and TTL-Level Sync-On-Green (SOG)
⦠Polarity detection for HSYNCI and VSYNCI
⦠Fast mode change detection function
Internal OSD Support
⦠128 ROM fonts at the size of 12x18
⦠64 programmable RAM fonts
⦠Internal SRAM allows up to 320 characters, with programmable OSD frame size
⦠Programmable shadow or border control for each character
⦠Programmable blinking effect for each character
2003/4/15
4
Ver.1.0
|
▷ |