S6E2C2 Datasheet, PDF (96/207 Pages) Cypress Semiconductor – 32-bit ARM® Cortex®-M4F FM4 Microcontroller

S6E2C2 Series
12.2 Recommended Operating Conditions
Parameter
Symbol
Power supply voltage
VCC
Conditions
-
Power supply voltage (for USB ch 0) USBV_CC0
-
Value
Min
Max
2.7 ^*9
5.5
3.6
3.0
( ≤VCC)
5.5
2.7
( ≤VCC)
Unit Remarks
V
*1
V
*2
Power supply voltage (for USB ch 1) USBV_CC1
-
3.6
3.0
( ≤VCC)
*3
V
2.7
5.5
( ≤VCC)
*4
3.0
3.6
( ≤VCC)
*5
Power supply voltage (for
Ethernet-MAC)
ETHVCC
-
4.5
5.5
( ≤VCC)
V *5
2.7
5.5
( ≤VCC)
*6
Power supply voltage (VBAT)
VBAT
-
1.65
5.5
V
Analog power supply voltage
AVCC
-
2.7
5.5
V AV_CC = V_CC
Analog reference voltage
AVRH
-
*8
AV_CC
V
AVRL
-
AV_SS
AV_SS
V
Operating
Junction temperature
TJ
-
- 40
+ 125
°C
temperature Ambient temperature
TA
-
- 40
*7
°C
*1: When P81/UDP0 and P80/UDM0 pins are used as USB (UDP0, UDM0)
*2: When P81/UDP0 and P80/UDM0 pins are used as GPIO (P81, P80)
*3: When P83/UDP1 and P82/UDM1 pins are used as USB (UDP1, UDM1)
*4: When P83/UDP1 and P82/UDM1 pins are used as GPIO (P83, P82)
*5: When the pins in "Ethernet-MAC Pins," except P6E/ADTG_5/SCK4_1/IC23_1/INT29_0/E_PPS pin, are used
as Ethernet-MAC pin
*6: When the pins in "Ethernet-MAC Pins," except P6E/ADTG_5/SCK4_1/IC23_1/INT29_0/E_PPS pin, are used
as Ethernet-MAC pin
*7: The maximum temperature of the ambient temperature (TA) can guarantee a range that does not exceed the
junction temperature (TJ).
The calculation formula of the ambient temperature (TA) is:
TA (Max) = TJ(Max) - Pd(Max) × θJA
Pd: Power dissipation (W)
θJA: Package thermal resistance (°C/W)
Pd (Max) = VCC × ICC (Max) + Σ (IOL×VOL) + Σ ((VCC-VOH) × (- IOH))
IOL: L level output current
IOH: H level output current
VOL: L level output voltage
VOH: H level output voltage
*8: The minimum value of analog reference voltage depends on the value of compare clock cycle (Tcck). See 12.5.
12-bit A/D Converter for the details.
*9: For the voltage range between VCC(min) and the low voltage detection reset (VDH), the MCU must be clocked from
either the High-speed CR or the low-speed CR.”
Document Number: 002-05030 Rev.*A
Page 96 of 207