S6E2C2 Datasheet, PDF (104/207 Pages) Cypress Semiconductor – 32-bit ARM® Cortex®-M4F FM4 Microcontroller

S6E2C2 Series
Table 12-4 Typical and Maximum Current Consumption in Normal Operation (Other Than PLL), Code with Data Accessing
Running from Flash Memory (Flash 0 Wait-cycle Mode and Read Access 0 Wait)
Parameter Symbol
Power
supply
ICC
current
Pin
Name
VCC
Conditions
Normal
operation
*6, *7
*5
(main
oscillation)
Normal
operation
*6
(built-in
*5
High-speed
CR)
Normal
operation
*6, *8
*5
(sub
oscillation)
Normal
operation
*6
*5
(built-in
low-speed CR)
Frequency*⁴
4 MHz
4 MHz
32 kHz
100 kHz
Value
Typ*¹ Max*²
4.7
84.9
3.9
83.8
3.0
83.2
2.1
82.0
0.78 80.37
0.77 80.36
0.81 80.39
0.78 80.38
Unit
Remarks
*3
mA When all peripheral
clocks are on
*3
mA When all peripheral
clocks are off
*3
mA When all peripheral
clocks are on
*3
mA When all peripheral
clocks are off
*3
mA When all peripheral
clocks are on
*3
mA When all peripheral
clocks are off
*3
mA When all peripheral
clocks are on
*3
mA When all peripheral
clocks are off
*1: TA = +25°C, VCC = 3.3 V
*2: TJ = +125°C, VCC = 5.5 V
*3: When all ports are fixed
*4: Frequency is a value of HCLK when PCLK0 = PCLK1 = PCLK2 = HCLK/2
*5: When operating flash 0 wait-cycle mode and read access 0 wait (FRWTR.RWT = 00, FBFCR.SD = 000)
*6: With data access to a MainFlash memory.
*7: When using the crystal oscillator of 4 MHz (including the current consumption of the oscillation circuit)
*8: When using the crystal oscillator of 32 Hz (including the current consumption of the oscillation circuit)
Document Number: 002-05030 Rev.*A
Page 104 of 207