AMIS-53000 Datasheet, PDF (81/99 Pages) AMI SEMICONDUCTOR – Frequency Agile Transceiver

AMIS-53000 Frequency Agile Transceiver
Data Sheet
7.1.10. Default Length of Packet
This register allows a default value for the LOP (5 bytes) such that the AMIS-53000 does not have to send the LOP with a buffered
packet.
Table 94: Default LOP - 0X31 [49]
Bit Name
Comment
7:0 _{DEFAULT_LOP [7:0]} Default value for the length of packet to be used in buffered TX/RX
7.1.11. Broadcast ID 1
Many applications in the wireless market make use of a broadcast function where the master note in a system can transmit to all
wireless nodes in the network without addressing each node individually, but still not broadcasting to nodes in another network.
Table 95: Broadcast ID1 - 0X3A [58]
Bit Name
Comment
7:0 _{Global_ID1 [7:0]}
Lower byte of the global address
7.1.12. Broadcast ID 0
Table 96: Broadcast ID0 - 0X3B [59]
Bit Name
Comment
7:0 _{Global_ID0 [7:0]}
Upper byte of the global address
7.2 TX/RX Data Interface Protocol
The AMIS-53000 TX/RX data format can be streaming data where the transmitter transmits each bit of data as it is received or it can be
packetized. Packetized data can be in packets up to 256 bytes. Packetized data can add a preamble, start of frame, identification
code, length of packet, and CRC error CheckSum.
Streaming or packetized data
Buffer size is 256 byte maximum
Packet overhead
Figure 44: Data Protocol Format
AMI Semiconductor – Aug. 05, Rev. 1.0
81
www.amis.com