Z87000 Datasheet, PDF (8/50 Pages) Zilog, Inc. – Spread Spectrum Controllers

Z87000/Z87L00
Spread Spectrum Controllers
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter
Min Max Units
V_DD, AV_DD DC Supply
Voltage(1)
V_IN
Input Voltage(2)
V_OUT
Output Voltage(3)
T_A
Operating
Temperature
T _STG
Storage
Temperature
-0.5 7.0
V
-0.5 V_DD + 0.5 V
-0.5 V_DD + 0.5 V
-20 +70
°C
-65 +150 °C
Notes:
1. Voltage on all pins with respect to GND.
2. Voltage on all inputs WRT VDD
3. Voltage on all outputs WRT VDD
Zilog
Stresses greater than those listed under Absolute Maxi-
mum Ratings may cause permanent damage to the de-
vice. This is a stress rating only; operation of the device at
any condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to ab-
solute maximum rating conditions for extended period may
affect device reliability.
STANDARD TEST CONDITIONS
The electrical characteristics listed below apply for the fol-
lowing standard test conditions, unless otherwise noted.
All voltages are referenced to GND. Positive current flows
into the referenced pins. Standard test conditions are as
follows:
s 3.0V < V_DD < 3.6V (Z87L00)
s 4.5V < V_DD < 5.5V (Z87000)
s GND = 0V
s T_A = -20 to +70 °C
Threshold
Voltage
IoL
Output
Under
Test
50pF
IoH
Figure 5. Test Load Diagram
1-8
PRELIMINARY
DS96WRL0501