W25M02GVZEIG-TR Datasheet, PDF (46/68 Pages) Winbond – 3V 2G-BIT (2 x 1G-BIT) SERIAL SLC NAND FLASH MEMORY WITH DUAL/QUAD SPI BUFFER READ & CONTINUOUS READ CONCURRENT OPERATIONS

W25M02GV
8.2.21 Fast Read Quad Output (6Bh)
The Fast Read Quad Output (6Bh) instruction is similar to the Fast Read Dual Output (3Bh) instruction
except that data is output on four pins, IO0, IO1, IO2, and IO3. The Fast Read Quad Output Instruction
allows data to be transferred at four times the rate of standard SPI devices.
The Fast Read Quad Output instruction sequence is shown in Figure 24a & 24b. When BUF=1, the device
is in the Buffer Read Mode. The data output sequence will start from the Data Buffer location specified by
the 16-bit Column Address and continue to the end of the Data Buffer. Once the last byte of data is output,
the output pin will become Hi-Z state. When BUF=0, the device is in the Continuous Read Mode, the data
output sequence will start from the first byte of the Data Buffer and increment to the next higher address.
When the end of the Data Buffer is reached, the data of the first byte of next memory page will be
following and continues through the entire memory array. This allows using a single Read instruction to
read out the entire memory array and is also compatible to Winbond’s SpiFlash NOR flash memory
command sequence.
When WP-E bit in the Status Register is set to a 1, this instruction is disabled.
/CS
CLK
Mode 3
Mode 0
DI
(IO0)
0
789
21 22 23
31 32 33 34 35 36 37 38 39 40
Instruction
6Bh
Column Address[15:0]
15 14 13
210
8 Dummy
Clocks
404040404
DO
(IO1)
High Impedance
515151515
High Impedance
IO2
626262626
High Impedance
IO3
737373737
* ^{= MSB}
*_Data
Out 1
*_Data
Out 2
*_Data
Out 3
*_Data
Out 4
*_Data
Out 5
Figure 24a. Fast Read Quad Output Instruction (Buffer Read Mode, BUF=1)
/CS
CLK
Mode 3
Mode 0
DI
(IO0)
DO
(IO1)
IO2
0
789
21 22 23
Instruction
6Bh
31 30 29
32 Dummy Clocks
18 17 16
High Impedance
High Impedance
39 40 41 42 43 44 45 46 47 48
0404040404
515151515
626262626
High Impedance
IO3
737373737
* ^{= MSB}
*_Data
Out 1
*_Data
Out 2
*_Data
Out 3
*_Data
Out 4
*_Data
Out 5
Figure 24b. Fast Read Quad Output Instruction (Continuous Read Mode, BUF=0)
- 45 -