DS90UB913A-Q1 Datasheet, PDF (9/51 Pages) Texas Instruments – 25-MHz to 100-MHz 10/12-Bit FPD-Link III Serializer

www.ti.com
DS90UB913A-Q1
SNLS443C – MAY 2013 – REVISED APRIL 2016
Electrical Characteristics^(1)(2)(3) (continued)
Over recommended operating supply and temperature ranges unless otherwise specified.
PARAMETER
TEST CONDITIONS
MIN
SERIALIZER SUPPLY CURRENT
V_{DD_n} = 1.89 V
V_DDIO = 3.6 V
f = 100 MHz, 10-bit
mode
Default Registers
V_{DD_n} = 1.89 V
Serializer (Tx)
R_L = 100 Ω
V_DDIO = 3.6 V
I_DDT
V_{DD_n} Supply Current
WORST CASE pattern f = 75 MHz, 12-bit
(includes load current)
(Figure 2)
high frequency mode
Default Registers
V_{DD_n} = 1.89 V
V_DDIO = 3.6 V
f = 50 MHz, 12-bit
low frequency mode
Default Registers
V_{DD_n} = 1.89 V
V_DDIO = 3.6 V
f = 100 MHz, 10-bit
mode
Default Registers
Serializer (Tx)
R_L = 100 Ω
I_DDT
V_{DD_n} Supply Current
RANDOM PRBS-7
(includes load current)
pattern
V_{DD_n} = 1.89 V
V_DDIO = 3.6 V
f = 75 MHz, 12-bit
high frequency mode
Default Registers
V_{DD_n} = 1.89 V
V_DDIO = 3.6 V
f = 50 MHz, 12-bit
low frequency mode
Default Registers
I_DDIOT
Serializer (Tx)
V_DDIO Supply Current
(includes load current)
R_L = 100 Ω
WORST CASE pattern
(Figure 2)
V_DDIO = 1.89 V
f = 75 MHz, 12-bit
high frequency mode
Default Registers
V_DDIO = 3.6 V
f = 75 MHz, 12-bit
high frequency
mode Default
Registers
I_DDTZ
Serializer (Tx) Supply
Current Power Down
PDB = 0V; All other
LVCMOS Inputs = 0 V
V_DDIO=1.89 V
Default Registers
V_DDIO = 3.6 V
Default Registers
I_DDIOTZ
Serializer (Tx) V_DDIO
Supply Current Power
Down
PDB = 0V; All other
LVCMOS Inputs = 0 V
V_DDIO = 1.89 V
Default Registers
V_DDIO = 3.6 V
Default Registers
TYP
MAX UNIT
61
80 mA
61
80
mA
61
80
65
64
mA
63
1.5
3
mA
5
8
300
1000 µA
300
1000 µA
15
100 µA
15
100 µA
Copyright © 2013–2016, Texas Instruments Incorporated
Product Folder Links: DS90UB913A-Q1
Submit Documentation Feedback
9