CD00161566 Datasheet, PDF (50/105 Pages) STMicroelectronics – nullMedium-density performance line ARM-based 32-bit MCU

Electrical characteristics
STM32F103x8, STM32F103xB
On-chip peripheral current consumption
The current consumption of the on-chip peripherals is given in Table 19. The MCU is placed
under the following conditions:
 all I/O pins are in input mode with a static value at V_DD or V_SS (no load)
 all peripherals are disabled unless otherwise mentioned
 the given value is calculated by measuring the current consumption
– with all peripherals clocked off
– with only one peripheral clocked on
 ambient operating temperature and V_DD supply voltage conditions summarized in
Table 6
Table 19. Peripheral current consumption⁽¹⁾
Peripheral
Typical consumption at 25 °C
Unit
TIM2
1.2
TIM3
1.2
TIM4
0.9
SPI2
0.2
APB1
USART2
USART3
0.35
mA
0.35
I2C1
0.39
I2C2
0.39
USB
0.65
CAN
0.72
GPIO A
0.47
GPIO B
0.47
GPIO C
0.47
GPIO D
0.47
APB2
GPIO E
ADC1⁽²⁾
0.47
mA
1.81
ADC2
1.78
TIM1
1.6
SPI1
0.43
USART1
0.85
1. f_HCLK = 72 MHz, f_APB1 = f_HCLK/2, f_APB2 = f_HCLK, default prescaler value for each peripheral.
2. SinptehceifAicDcCon_dCiRtio2nrsefgoisr _{tAeDr iCs:sfeHtCtLoK1=.} 56 MHz, f_APB1 = f_HCLK/2, f_APB2 = f_HCLK, f_ADCCLK = f_APB2/4, ADON bit
50/105
DocID13587 Rev 16