|
CD00161566 Datasheet, PDF (47/105 Pages) STMicroelectronics – nullMedium-density performance line ARM-based 32-bit MCU | |||
|
◁ |
STM32F103x8, STM32F103xB
Electrical characteristics
Figure 21. Typical current consumption in Standby mode versus temperature at
VDD = 3.3 V and 3.6 V
4.5
4
3.5
3
2.5
3.3 V
2
3.6 V
1.5
1
0.5
0
â45 °C
25 °C
85 °C
Temperature (°C)
105 °C
Typical current consumption
The MCU is placed under the following conditions:
ï· All I/O pins are in input mode with a static value at VDD or VSS (no load).
ï· All peripherals are disabled except if it is explicitly mentioned.
ï· The Flash access time is adjusted to fHCLK frequency (0 wait state from 0 to 24 MHz, 1
wait state from 24 to 48 MHz and 2 wait states above).
ï· Ambient temperature and VDD supply voltage conditions summarized in Table 9.
ï· Prefetch is ON (Reminder: this bit must be set before clock setting and bus prescaling)
ï· When the peripherals are enabled fPCLK1 = fHCLK/4, fPCLK2 = fHCLK/2, fADCCLK =
fPCLK2/4
DocID13587 Rev 16
47/105
104
|
▷ |