CD00161566 Datasheet, PDF (101/105 Pages) STMicroelectronics – nullMedium-density performance line ARM-based 32-bit MCU

STM32F103x8, STM32F103xB
Revision history
Table 61. Document revision history (continued)
Date
Revision
Changes
21-Jul-2008
Power supply supervisor updated and V_DDA added to Table 9: General
operating conditions.
Capacitance modified in Figure 14: Power supply scheme on page 36.
Table notes revised in Section 5: Electrical characteristics.
Table 16: Typical and maximum current consumptions in Stop and
Standby modes modified.
Data added to Table 16: Typical and maximum current consumptions in
Stop and Standby modes and Table 21: Typical current consumption in
Standby mode removed.
f_{HSE_ext} modified in Table 20: High-speed external user clock
characteristics on page 51. f_{PLL_IN} modified in Table 27: PLL
characteristics on page 57.
8
Minimum SDA and SCL fall time value for Fast mode removed from
Table 40: I2C characteristics on page 70, note 1 modified.
t_h(NSS) modified in Table 42: SPI characteristics on page 72 and
Figure 33: SPI timing diagram - slave mode and CPHA = 0 on page 73.
C_ADC modified in Table 46: ADC characteristics on page 76 and
Figure 38: Typical connection diagram using the ADC modified.
Typical T_{S_temp} value removed from Table 50: TS characteristics on
page 80.
LQFP48 package specifications updated (see Table 58 and Table 55),
Section 6: Package characteristics revised.
Axx option removed from Table 60: Ordering information scheme on
page 96.
Small text changes.
STM32F103x6 part numbers removed (see Table 60: Ordering
information scheme). Small text changes.
General-purpose timers (TIMx) and Advanced-control timer (TIM1) on
page 18 updated.
Notes updated in Table 5: Medium-density STM32F103xx pin definitions
on page 28.
Note 2 modified below Table 6: Voltage characteristics on page 37,
|V_DDx| min and |V_DDx| min removed.
22-Sep-2008
9
Measurement conditions specified in Section 5.3.5: Supply current
characteristics on page 41.
I_DD in standby mode at 85 °C modified in Table 16: Typical and
maximum current consumptions in Stop and Standby modes on
page 45.
General input/output characteristics on page 62 modified.
f_HCLK conditions modified in Table 30: EMS characteristics on page 59.
_JA and pitch value modified for LFBGA100 package in Table 59:
Package thermal characteristics. Small text changes.
DocID13587 Rev 16
101/105
104