|
HD66787 Datasheet, PDF (35/159 Pages) Renesas Technology Corp – 528-channel, One-chip Driver with 262,144-color Display RAM and Power Supply Circuit for Low-temperature Poli-Si TFT (LTPS-TFT) Panels with Incorporat | |||
|
◁ |
HD66787
Preliminary
TRI DFM1 DFM0
0 00
0
*
*
10*
11 0
11 1
8-bit interface data format
First transmission
Second transmission
DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10
DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
First transmission
Setting disabled
Setting disabled
Second transmission
Third transmission
DB17 DB16 DB15 DB14 DB13 DB12 DB17 DB16 DB15 DB14 DB13 DB12 DB17 DB16 DB15 DB14 DB13 DB12
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
First transmission
Second transmission
Third transmission
DB17 DB16 DB15 DB14 DB13 DB12 DB17 DB16 DB15 DB14 DB13 DB12 DB17 DB16 DB15 DB14 DB13 DB12
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
8-bit interface data format
I/D1-0="00â
horizontal : decrement
vertical : decrement
I/D1-0="01â
horizontal : increment
vertical : decrement
0000h
0000h
I/D1-0="10â
horizontal : decrement
vertical : increment
I/D1-0="11â
horizontal : increment
vertical : increment
0000h
0000h
AM="0â
horizontal
AM="1â
vertical
0000h
EFAFh
0000h
EFAFh
0000h
EFAFh
0000h
EFAFh
EFAFh
EFAFh
EFAFh
Note : Data are written only on the GRAM area specified with the window
addresses when window addresses are set.
EFAFh
Address transition direction
LG2â0: Rewrite data to GRAM after comparing the data that are written by the microcomputer to GRAM
with the values in the compare registers (CP17â0) and performing logical operation. For details, see the
âGraphics Operation Functionâ
CP17â0: Set the value for the compare register, with which the data read out from GRAM or data written
to GRAM by the microcomputer are compared. This function is not available with the external display
interface mode. In the external display interface mode, make sure LG2-0 = â000â.
BGR: Reverse the order from R, G, B to B, G, R to the 18-bit data to write to GRAM. When setting BGR
= 1, CP17-0 and WM17-0 bits will be automatically changed to the same effect.
Rev.0.22, May.23.2003, page 35 of 159
|
▷ |