HD66787 Datasheet, PDF (110/159 Pages) Renesas Technology Corp – 528-channel, One-chip Driver with 262,144-color Display RAM and Power Supply Circuit for Low-temperature Poli-Si TFT (LTPS-TFT) Panels with Incorporat

HD66787
Preliminary
Window Address Function
The window address function enables consecutive data write within the rectangular window-address area
on the on-chip GRAM, which is specified with horizontal address registers (start: HSA7-0, end: HEA 7-0)
and vertical address registers (start: VSA7-0, end: VEA7-0).
The address transition direction is determined with AM bits (either increment or decrement). Accordingly,
the data, including picture data, are written consecutively without taking the data wrap position into
consideration.
The window-address range must be specified within the GRAM address area. An address set must be set
within the window-address range.
[Condition on setting window-address range]
(Horizontal direction) 00H ≤ HSA7-0 ≤ HSA7-0 ≤ AFH
(Vertical direction)
00H ≤ VSA7-0 ≤ VEA7-0 ≤ EFH
[Condition on making an address set within the window-address range]
(RAM address)
HSA7-0 ≤ AD7-0 ≤ HEA7-0
VSA7-0 ≤ AD15-8 ≤ VEA7-0
Note: In high-speed RAM write mode, the lower two bits of the address must be set as follows.
ID0=0: The lower two bits of the address must be set to 11.
ID0=1: The lower two bits of the address must be set to 00.
“0000”H
GRAM address map
Window address area
“2010”H
“2110”H
“202F”H
“212F”H
“00AF”H
“5F10”H
“5F2F”H
“EF00”H
Window address range specification area
HSA7-0 = “10”H, HSE7-0 = “2F”H
I/D = 1 (increment)
VSA7-0 = “20”H, VEA7-0 = “5F”H
AM = 0 (horizontal writing)
“EFAF”H
Address transition direction in specified window-address range
Rev.0.22, May.23.2003, page 110 of 159