PIC18F86K22-I Datasheet, PDF (498/550 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Enhanced Flash Microcontrollers

PIC18F87K22 FAMILY
31.3 DC Characteristics: PIC18F87K22 Family (Industrial/Extended) (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA  +85°C for industrial
-40°C TA  +125°C for extended
Param
No.
Symbol
Characteristic
Min
VOL Output Low Voltage
D080
I/O Ports:
PORTA, PORTB, PORTC
—
D083
VOH
D090
PORTD, PORTE, PORTF, PORTG,
PORTH, PORTJ
OSC2/CLKO (EC modes)
Output High Voltage⁽¹⁾
I/O Ports:
PORTA, PORTB, PORTC
—
—
VDD – 0.7
D092
PORTD, PORTE, PORTF, PORTG,
PORTH, PORTJ
OSC2/CLKO (INTOSC, EC modes)
VDD – 0.7
VDD – 0.7
Capacitive Loading Specs
on Output Pins
D100 COSC2 OSC2 Pin
—
D101 CIO All I/O Pins and OSC2
—
D102 CB
SCLx, SDAx
—
Note 1: Negative current is defined as current sourced by the pin.
Max Units
Conditions
0.6
V IOL = 8.5 mA, VDD = 4.5V,
-40C to +125C
0.6
V IOL = 3.5 mA, VDD = 4.5V,
-40C to +125C
0.6
V IOL = 1.6 mA. VDD = 5.5V,
-40C to +125C
V
—
V IOH = -3 mA, VDD = 4.5V,
-40C to +125C
—
V IOH = -2 mA, VDD = 4.5V,
-40C to +125C
—
V IOH = -1 mA, VDD = 5.5V,
-40C to +125C
20
pF In HS mode when
external clock is used to
drive OSC1
50
pF To meet the AC Timing
Specifications
400
pF I²C™ Specification
31.4 DC Characteristics: CTMU Current Source Specifications
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 5.5V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Sym
Characteristic
Min
Typ⁽¹⁾
Max Units
Conditions
IOUT1 CTMU Current Source,
Base Range
—
550
—
nA CTMUICON<1:0> = 01
IOUT2 CTMU Current Source,
10x Range
—
5.5
—
A CTMUICON<1:0> = 10
IOUT3 CTMU Current Source,
—
55
—
A CTMUICON<1:0> = 11
100x Range
Note 1: Nominal value at center point of current trim range (CTMUICON<7:2> = 000000).
DS39960D-page 498
 2011 Microchip Technology Inc.