English
Language : 

LTC3883 Datasheet, PDF (96/112 Pages) Linear Technology – Single Phase Step-Down DC/DC Controller with Digital Power System Management
LTC3883/LTC3883-1
PMBus Command Details
MFR_PADS
This command provides the user a means of directly reading the digital status of the I/O pins of the device. The bit
assignments of this command are as follows:
BIT ASSIGNED DIGITAL PIN
15 VDD33 OV Fault
14 VDD33 UV Fault
13 Reserved
12 Reserved
11 ADC Values Invalid, Occurs
During Start-Up
10 Device Driving ALERT Low
9 Reserved
8 Power Good
7 Reserved
6 Device Driving RUN Low
5 Reserved
4 RUN
3 Reserved
2 Device Driving GPIO Low
1 Reserved
0 GPIO
A 1 indicates the condition is true.
This read-only command has two data bytes.
MFR_COMMON
The MFR_COMMON command contains bits that are common to all LTC digital power and telemetry products.
BIT MEANING
7 Chip Not Driving ALERT Low
6 Busy when Low
5 Calculations Not Pending
4 Output in Transition when Low
3 NVM Initialized
2 Reserved
1 SHARE_CLK Timeout
0 WP Pin Status
This read-only command has one data byte.
3883f
96