AC82GL40-SLB95 Datasheet, PDF (7/98 Pages) Intel Corporation – Intel® Celeron® Mobile Processor Dual-Core on 45-nm Process

Introduction
1
Note:
Introduction
This document provides electrical, mechanical, and thermal specifications for the
Intel® Celeron® Mobile Processor Dual-Core T1x00, Intel(R) Celeron Processors T3x00
and Intel(R) Celeron Dual-core SFF Processors. The processor supports the Mobile
Intel® 4 Series Express Chipset and Intel® 82801IBM (ICH9M) Controller-Hub Based
Systems.
In this document, the Celeron processor is referred to as the processor and Mobile
Intel® 4 Series Express Chipset family is referred to as the (G)MCH.
The following list provides some of the key features on this processor:
• Dual-Core processor for mobile with enhanced performance
• Intel architecture with Intel® Wide Dynamic Execution
• L1 Cache to Cache (C2C) transfer
• On-die, primary 32-KB instruction cache and 32-KB write-back data cache in each
core
• On-die, 1-MB second level shared cache with advanced transfer cache architecture
• Streaming SIMD Extensions 2 (SSE2), Streaming SIMD Extensions 3 (SSE3) and
Supplemental Streaming SIMD Extensions 3 (SSSE3)
• 667-MHz Source-Synchronous Front Side Bus (FSB) for the T1x00 Series, and 800-
MHz Source-Synchronous Front Side Bus (FSB) for the T3x00 Series processors
and SFF processors
• Digital Thermal Sensor (DTS)
• Intel® 64 Technology
• PSI2 functionality
• Execute Disable Bit support for enhanced security
• Half ratio support (N/2) for Core to Bus ratio
• Supports enhanced Intel® Virtualization Technology (SFF processor only)
• Intel® Deeper Sleep low-power state with P_LVL4 I/O Support (SFF processor
only)
• Advanced power management feature includes Enhanced Intel SpeedStep®
Technology (SFF processor only)
Datasheet
7