AC82GL40-SLB95 Datasheet, PDF (26/98 Pages) Intel Corporation – Intel® Celeron® Mobile Processor Dual-Core on 45-nm Process

Electrical Specifications
3.10
Processor DC Specifications
The processor DC specifications in this section are defined at the processor
core (pads) unless noted otherwise. See Table 4 for the pin signal definitions and
signal pin assignments.
Table 7 through Table 10 list the DC specifications for the processor and are valid only
while meeting specifications for junction temperature, clock frequency, and input
voltages. The Highest Frequency Mode (HFM) and Super Low Frequency Mode
(SuperLFM) refer to the highest and lowest core operating frequencies supported on
the processor. Active mode load line specifications apply in all states except in the Deep
Sleep and Deeper Sleep states. V_CC,BOOT is the default voltage driven by the voltage
regulator at power up in order to set the VID values. Unless specified otherwise, all
specifications for the processor are at Tjunction = 100 °C. Care should be taken to read
all notes associated with each parameter.
26
Datasheet