GS2961 Datasheet, PDF (46/104 Pages) Gennum Corporation – 3Gb/s, HD, SD SDI Receiver, with Integrated Adaptive Cable Equalizer complete with SMPTE Video Processing

4.11 Programmable Multi-function Outputs
The GS2961 has 6 multi-function output pins, STAT [5:0], which are programmable via
the host interface to output one of the following signals:
Table 4-8: Output Signals Available on Programmable Multi-Function Pins
Status Signal
H/HSYNC (according to TIM_861 Pin) Section 4.12
V/VSYNC (according to TIM_861 Pin) Section 4.12
F/DE (according to TIM_861 Pin) Section 4.12
LOCKED Section 4.7
Y/1ANC Section 4.17
C/2ANC Section 4.17
DATA ERROR Section 4.16
EDH DETECTED
CARRIER DETECT
RATE_DET0
RATE_DET1
Selection Code
0000
0001
0010
0011
0100
0101
0110
1001
1010
1011
1100
Each of the STAT[5:0] pins are configurable individually using the register bits in the host
interface; STAT[5:0]_CONFIG (008h/009h).
Default Output Pin
STAT 0
STAT 1
STAT 2
STAT 3
STAT 4
−
STAT 5
−
−
−
−
GS2961 3Gb/s, HD, SD SDI Receiver, with Integrated
Adaptive Cable Equalizer
Data Sheet
48004 - 2
November 2009
46 of 104