|
PXD10 Datasheet, PDF (91/130 Pages) Lumins Inc. – 4” Dia.X 6” extruded aluminum step poles | |||
|
◁ |
Electrical characteristics
Table 41. Slow external crystal oscillator (32 KHz) electrical characteristics
Symbol C
Parameter
Conditions1
Value
Unit
Min
Typ
Max
fSXOSC SR T Slow external crystal oscillator â
frequency
32
â
VSXOSC
ISXOSC
CC T Oscillation amplitude
VDD = 3.3 V ± 10%
T
VDD = 5.0 V ± 10%
CC D Slow external crystal oscillator â
consumption
1.12
1.33
1.12
1.37
â
â
TSXOSCSU CC T Slow external crystal oscillator â
start-up time
â
â
VIH SR D Input high level CMOS Schmitt Oscillator bypass mode 0.65VDD
â
Trigger
VIL SR D Input low level CMOS Schmitt Oscillator bypass mode ï0.4
â
Trigger
NOTES:
1 VDD = 3.3 V ± 10% / 5.0 V ± 10%, TA = ï40 to 105 °C, unless otherwise specified
2 The quoted figure is based on a board that is properly laid out and has no stray capacitances.
40 kHz
1.74 V
1.74
5
µA
22
s
VDD + 0.4 V
0.35VDD V
3.13 FMPLL electrical characteristics
The device provides a frequency-modulated phase-locked loop (FMPLL) module to generate a fast system
clock from the main oscillator driver.
Table 42. FMPLL electrical characteristics
Symbol C
Parameter
Conditions1
Value
Unit
Min Typ Max
fPLLIN SR T FMPLL reference clock2
â
ïPLLIN SR T FMPLL reference clock duty cycle2 â
4 â 64 MHz
40 â 60 %
fPLLOUT CC T FMPLL output clock frequency
â
fCPU CC T System clock frequency
â
16 â 64 MHz
â â 643 MHz
tLOCK CC T FMPLL lock time
Stable oscillator (fPLLIN = 16 MHz) â â 200 µs
ïtPKJIT CC T FMPLL jitter (peak to peak)
fPLLIN = 16 MHz (resonator)
â â 220 ps
ïtLTJIT CC T FMPLL long term jitter
fPLLIN = 16 MHz (resonator)
â â 1.5 ns
IPLL CC D FMPLL consumption
TA = 25 °C
â â 4 mA
NOTES:
1 VDDPLL = 1.2 V ± 10%, TA = ï40 to 105 °C, unless otherwise specified.
2 PLLIN clock retrieved directly from FXOSC clock. Input characteristics are granted when oscillator is used in
functional mode. When bypass mode is used, oscillator input clock should verify fPLLIN and ïPLLIN.
3 fCPU 64 MHz can be achieved only at temperatures up to TA = 105 °C with a maximum FM depth of 2%.
PXD10 Microcontroller Data Sheet, Rev. 1
Freescale Semiconductor
91
|
▷ |