PXD10 Datasheet, PDF (78/130 Pages) Lumins Inc. – 4” Dia.X 6” extruded aluminum step poles

Electrical characteristics
Table 30. SLOW configuration output buffer electrical characteristics
Symbol C
Parameter
Conditions¹
Value
Unit
Min Typ Max
V_OH CC P Output high level
SLOW configuration
Push Pull, I_OH = 2 mA,
0.8V_DD —
—
V
V_DD = 5.0 V ±10%, PAD3V5V = 0
(recommended)
D
Push Pull, I_OH = 2 mA,
0.8V_DD —
—
V_DD = 5.0 V ±10%, PAD3V5V = 1²
C
Push Pull, I_OH = 1 mA,
V_DD  0.8 —
—
V_DD = 3.3 V ±10%, PAD3V5V = 1
(recommended)
V_OL CC P Output low level
SLOW configuration
Push Pull, I_OL = 2 mA,
—
V_DD = 5.0 V ± 10%, PAD3V5V = 0
(recommended)
— 0.1V_DD V
D
Push Pull, I_OL = 2 mA,
—
— 0.1V_DD
V_DD = 5.0 V ± 10%, PAD3V5V = 1²
C
Push Pull, I_OL = 1 mA,
—
—
0.5
V_DD = 3.3 V ± 10%, PAD3V5V = 1
(recommended)
T_tr CC T Output transition time output C_L = 25 pF,
—
—
50
ns
pin³
V_DD = 5.0 V ±10%, PAD3V5V = 0
T ^{SLOW configuration}
C_L = 50 pF,
—
— 100
V_DD = 5.0 V ±10%, PAD3V5V = 0
T
C_L = 100 pF,
—
— 125
V_DD = 5.0 V ±10%, PAD3V5V = 0
T
C_L = 25 pF,
—
—
40
V_DD = 3.3 V ±10%, PAD3V5V = 1
T
C_L = 50 pF,
—
—
50
V_DD = 3.3 V ±10%, PAD3V5V = 1
T
C_L = 100 pF,
—
—
75
V_DD = 3.3 V ±10%, PAD3V5V = 1
I_tr50 CC D Current slew at C_L = 50 pF recommended configuration at
—
—
SLOW configuration
V_DD = 5.0 V ±10%, PAD3V5V = 0
V_DD = 3.3 V ±10%, PAD3V5V = 1
2 mA/ns
D
V_DD = 5.0 V ±10%, PAD3V5V = 1 —
—
7
NOTES:
1 _{VDD = 3.3 V  10% / 5.0 V  10%, TA = 40 to 105 °C, unless otherwise specified}
2 _{This is a transient configuration during power-up. All pads but RESET and NEXUS output (MDOx, EVTO, MCK) are}
configured in input or in high impedance state.
3 _{CL calculation should include device and package capacitances (CPKG < 5 pF).}
PXD10 Microcontroller Data Sheet, Rev. 1
78
Freescale Semiconductor