PXD10 Datasheet, PDF (2/130 Pages) Lumins Inc. – 4” Dia.X 6” extruded aluminum step poles

Overview
1 Overview
1.1 Document overview
This document describes the device features and highlights important electrical and physical
characteristics. For functional characteristics, see the PXD10 Microcontroller Reference Manual.
1.2 Description
The PXD10 family of chips is designed to enable the development of industrial HMI applications by
providing a single-chip solution capable of hosting real-time applications and driving a TFT display
directly using an on-chip color TFT display controller.
PXD10 chips incorporate a cost-efficient host processor core compliant with the Power Architecture^®
embedded category. The processor is 100% user-mode compatible with the Power Architecture and
capitalizes on the available development infrastructure of current Power Architecture devices with full
support from available software drivers, operating systems and configuration code to assist with users'
implementations.
Offering high performance processing at speeds up to 64 MHz, the PXD10 family is optimized for low
power consumption and supports a range of on-chip SRAM and internal flash memory sizes. The version
with 1 MB of flash memory (PXD1010) features 160 KB of on-chip graphics SRAM.
See Table 1 for specific memory and feature sets of the product family members.
1.3
Device comparison
Table 1. PXD10 family feature set
Feature
PXD1005
PXD1010
CPU
Execution speed
Flash (ECC)
EEPROM Emulation Block (ECC)
RAM (ECC)
Graphics RAM
MPU
eDMA
Display Control Unit (DCU)
Parallel Data Interface
Stepper Motor Controller (SMC)
Stepper Stall Detect (SSD)
Sound Generation Logic (SGL)
e200z0h
Static – 64 MHz
512 KB
1 MB
4 × 16 KB
48 KB
No
160 KB
12 entry
16 channels
No
Yes
No
Yes
6 motors
Yes
Yes
PXD10 Microcontroller Data Sheet, Rev. 1
2
Freescale Semiconductor