PXD10 Datasheet, PDF (52/130 Pages) Lumins Inc. – 4” Dia.X 6” extruded aluminum step poles

Pinout and signal descriptions
Table 7. Pad type descriptions
Abbreviation¹
Description
F
Fast (with GPIO and digital alternate function)
J
Slow pads with analog muxing (built for ADC channels)
M1
Medium (with GPIO and digital alternate function)
M2
Programmable medium/slow pad (programmed via the slew rate control in the PCR):
Slew rate disabled: Slow driver configuration (AC/DC parameters same as for a slow pad)
Slew rate enabled: Medium driver configuration (AC/DC parameters same as for a medium pad)
S
Slow (with GPIO and digital alternate function)
SMD
Stepper motor driver (with slew rate control)
X
Oscillator
NOTES:
1 _{The pad descriptions refer to the different Pad Configuration Register (PCR) types. Refer to the SIUL chapter in the}
device reference manual for the features available for each pad type.
2.8.1 Signal details
Signal
ABS[0]
ANS[0:15]
MA[0:2]
FABM
DCU_DE
DCU_HSYNC
DCU_PCLK
DCU_R[0:7],
DCU_G[0:7],
DCU_B[0:7]
DCU_TAG
DCU_VSYNC
PCS[0..2]_0,
PCS[0..2]_1
SCK_0,
SCK_1
Peripheral
BAM
ADC
ADC
DCU
DCU
DCU
DCU
DCU
DCU
DSPI
DSPI
Table 8. Signal details
Description
Alternate Boot Select. Gives an option to boot by downloading code
via CAN or LIN.
Inputs used to bring into the device sensor-based signals for A/D
conversion. ANS[0:15] connect to ATD channels [32:47].
These three control bits are output to enable the selection for an
external Analog Mux for expansion channels. The available 8
multiplexed channels connect to ATD channels [64:71].
Force Alternate Boot mode. Forces the device to boot from the
external bus (Can or LIN). If not asserted, the device boots up from
the lowest flash sector containing a valid boot signature.
Indicates that valid pixels are present.
Horizontal sync pulse for TFT-LCD display
Output pixel clock for TFT-LCD display
Red, green and blue color 8-bit Pixel values for TFT-LCD displays
Indicates when a tagged pixel is present in safety mode
Vertical sync pulse for TFT-LCD display
Peripheral chip selects when device is in Master mode; not used in
slave modes.
SPI clock signal—bidirectional
PXD10 Microcontroller Data Sheet, Rev. 1
52
Freescale Semiconductor