PXD10 Datasheet, PDF (112/130 Pages) Lumins Inc. – 4” Dia.X 6” extruded aluminum step poles

Electrical characteristics
Table 57. IRQ and NMI timing
No.
Symbol
C
Parameter
Value
Unit
Min Max
1
t_IPWL CC T IRQ/NMI Pulse Width Low
200
—
ns
2
t_IPWH CC T IRQ/NMI Pulse Width High
3
t_ICYC CC T IRQ/NMI Edge to Edge Time¹
200
—
ns
400
—
ns
NOTES:
1 _{Applies when IRQ/NMI pins are configured for rising edge or falling edge events, but not both.}
1,2
1,2
3
Figure 33. IRQ and NMI timing
3.20.5 eMIOS timing
Table 58. eMIOS timing¹
No.
Symbol
C
Parameter
Value
Min²
Unit
Max
1
t_MIPW
CC D eMIOS input pulse width
4
—
t_CYC
2
t_MOPW
CC D eMIOS output pulse width
1
—
t_CYC
NOTES:
1 _{eMIOS timing specified at fSYS = 64 MHz, VDD12 = 1.14 V to 1.32 V, VDDE_x = 3.0 V to 5.5 V, TA = 40 to 105 °C,}
and C_L = 50 pF with SRC = 0b00
2 _{There is no limitation on the peripheral for setting the minimum pulse width, the actual width is restricted by the pad}
delays. Refer to the pad specification section for the details.
PXD10 Microcontroller Data Sheet, Rev. 1
112
Freescale Semiconductor