PXD10 Datasheet, PDF (60/130 Pages) Lumins Inc. – 4” Dia.X 6” extruded aluminum step poles

Electrical characteristics
Table 13. Recommended operating conditions (3.3 V) (continued)
Symbol C
Parameter
Conditions
Value
Unit
Min
Max
V_SSOSC SR C Voltage on VSSOSC (oscillator ground) pin
—
with respect to V_SS
0
0
V
V_LCD
TV_DD
SR C Voltage on VLCD (LCD supply) pin with
respect to V_SS
SR C V_DD slope to ensure correct power up
—
0
V_{DDE_A} + 0.3 V
—
510^–6
0.25 V/µs
T_A SR C Ambient temperature under bias
—
40
105
°C
T_J SR C Junction temperature under bias
40
150
NOTES:
1 _{100 nF capacitance needs to be provided between VDDA/VSSA pair.}
2 _{At least 10 µF capacitance must be connected between VDDR and VSS. This is required because of sharp surge}
due to external ballast.
3 _{VDD refers collectively to I/O voltage supplies, i.e., VDDE_A, VDDE_B, VDDE_C, VDDE_E, VDDMA, VDDMB and VDDMC.}
4 _{100 nF capacitance needs to be provided between each VDD/VSS pair}
5 _{Full electrical specification cannot be guaranteed when voltage drops below 3.0 V. In particular, ADC electrical}
characteristics and I/O’s DC electrical specification may not be guaranteed.
When voltage drops below V_LVDHVL device is reset.
6 _{VSS refers collectively to I/O voltage supply grounds, i.e., VSSE_A, VSSE_B, VSSE_C, VSSE_E, VSSMA, VSSMB and}
V_SSMC) unless otherwise noted.
Table 14. Recommended operating conditions (5.0 V)
Symbol C
Parameter
Conditions
V_DDA1 SR C Voltage on VDDA pin (ADC reference) with
—
C ^{respect to ground (VSS)}
Voltage drop²
C
Relative to
V_{DDE_C}
V_SSA SR C Voltage on VSSA (ADC reference) pin with
—
respect V_SS
V_SSPLL
V_DDR3
SR C Voltage on VSSPLL pin with respect to
—
V_SS12
SR C Voltage on VDDR pin (regulator supply) with
—
C ^{respect to ground (VSSR)}
Voltage drop²
V_SSR
V_SS12
V_DD4,5
C
Relative to V_DD
SR C Voltage on VSSR (regulator ground) pin with
—
respect to V_SS12
CC C Voltage on VSS12 pin with respect to V_SS
SR C Voltage on VDD pins (VDDE_A, VDDE_B,
VDDE_C, VDDE_E, VDDMA, VDDMB,
VDDMC) with respect to ground (V_SS)
—
Voltage drop²
Value
Unit
Min
Max
4.5
5.5
V
3.0
V_DD  0.1
5.5
V_DD + 0.1
V_SS  0.1
V_SS + 0.1 V
0
0
V
4.5
3.0
V_DD  0.1
0
5.5
V
5.5
V_DD + 0.1
0
V
V_SS  0.1
4.5
V_SS + 0.1 V
5.5
V
PXD10 Microcontroller Data Sheet, Rev. 1
60
Freescale Semiconductor