|
MC68HC908GR16 Datasheet, PDF (20/276 Pages) Motorola, Inc – Microcontrollers | |||
|
◁ |
General Description
⢠1 Kbyte of on-chip random-access memory (RAM)
⢠406 bytes of FLASH programming routines read-only memory (ROM)
⢠Serial peripheral interface (SPI) module
⢠Enhanced serial communications interface (ESCI) module
⢠LIN specific enhanced features:
â Generation of LIN 1.2 break symbols without extra software steps on each message
â Break detection filtering to prevent false interrupts
⢠Two 16-bit timer interface modules (2-channel TIM1 and 2-channel TIM2) with selectable input
capture, output compare, and pulse-width modulation (PWM) capability on each channel
⢠Up to 8-channel, 10-bit successive approximation analog-to-digital converter (ADC) depending on
package choice
⢠BREAK (BRK) module to allow single breakpoint setting during in-circuit debugging
⢠Internal pullups on IRQ and RST to reduce customer system cost
⢠Up to 37 general-purpose input/output (I/O) pins, including:
â 28 shared-function I/O pins
â Up to nine dedicated I/O pins, depending on package choice
⢠Selectable pullups on inputs only on ports A, C, and D. Selection is on an individual port bit basis.
During output mode, pullups are disengaged.
⢠High current 10-mA sink/source capability on all port pins
⢠Higher current 20-mA sink/source capability on PTC0âPTC4
⢠Timebase module (TBM) with clock prescaler circuitry for eight user selectable periodic real-time
interrupts with optional active clock source during stop mode for periodic wakeup from stop using
an external crystal
⢠User selection of having the oscillator enabled or disabled during stop mode
⢠Up to 8-bit keyboard wakeup port depending on package choice
⢠5 mA maximum current injection on all port pins to maintain input protection
⢠Available packages:
â 32-pin LQFP
â 48-pin low-profile quad flag pack (LQFP)
⢠Specific features of the MC68HC908GR16 in 32-pin LQFP are:
â Port A is only 4 bits: PTA0âPTA3; 4-pin keyboard interrupt (KBI) module
â Port B is only 6 bits: PTB0âPTB5; 6-channel ADC module
â Port C is only 2 bits: PTC0âPTC1
â Port D is only 7 bits: PTD0âPTD6; shared with SPI, TIM1, and TIM2 modules
â Port E is only 2 bits: PTE0âPTE1; shared with ESCI module
⢠Specific features of the MC68HC908GR16 in 48-pin LQFP are:
â Port A is 8 bits: PTA0âPTA7; 8-pin KBI module
â Port B is 8 bits: PTB0âPTB7; 8-channel ADC module
â Port C is only 7 bits: PTC0âPTC6
â Port D is 8 bits: PTD0âPTD7; shared with SPI, TIM1, and TIM2 modules
â Port E is only 6 bits: PTE0âPTE5; shared with ESCI module
MC68HC908GR16 Data Sheet, Rev. 5.0
20
Freescale Semiconductor
|
▷ |