MC68HC05P9A Datasheet, PDF (112/158 Pages) Freescale Semiconductor, Inc – HCMOS Microcontroller Unit

SIOP
Freescale Semiconductor, Inc.
I/O Registers
The following registers control and monitor SIOP operation:
• SIOP control register (SCR)
• SIOP status register (SSR)
• SIOP data register (SDR)
SIOP Control
Register
The read/write SIOP control register (SCR) contains two bits. One bit
enables the SIOP, and the other configures the SIOP for master mode
or for slave mode.
$000A Bit 7
6
5
4
3
2
1
Bit 0
Read: 0
0
0
0
0
0
SPE
MSTR
Write:
Reset: 0
0
0
0
0
0
0
0
= Unimplemented
Figure 64. SIOP Control Register (SCR)
SPE — SIOP Enable
This read/write bit enables the SIOP. Setting SPE initializes the data
direction register as follows:
• The PB6/SDI pin is an input.
• The PB5/SDO pin is an output.
• The PB7/SCK pin is an input in slave mode and an output in
master mode.
Clearing SPE disables the SIOP and returns the port to its normal I/O
functions. The data direction register and the port data register remain
in their SIOP-initialized state.
NOTE: After clearing SPE, be sure to initialize the port for its intended I/O use.
14-mc68hc05p9a
112
SIOP
MOTOROLA
For More Information On This Product,
Go to: www.freescale.com