IBIS4-A-6600 Datasheet, PDF (8/40 Pages) Cypress Semiconductor – 6.6 MP CMOS Image Sensor

ADVANCE
INFORMATION
IBIS4-A-6600
CYII4SM6600AB
Electrical Specifications
Absolute Maximum Ratings
Table 5. Absolute Maximum Ratings
Symbol
Parameter
Value
Unit
VDD
DC supply voltage
–0.5 to 3.3
V
VIN
DC input voltage
–0.5 to (VDD + 0.5)
V
VOUT
DC output voltage
–0.5 to (VDD + 0.5)
V
IIO
DC current drain per pin; any single input or output. ± 50
mA
TL
Lead temperature (5 seconds soldering).
350
°C
TST
Storage temperature
–30 to +85
°C
H
Humidity (relative)
85% at 85 °C
ESD
ESD susceptibility
2000
V
VDD = VDDD = VDDA (VDDD is supply to digital circuit, VDDA to analog circuit).
Stresses beyond those listed under "Absolute Maximum
Ratings" may cause permanent damage to the device. These
are stress ratings only and functional operation of the device
at these or any other conditions beyond those indicated in the
operational sections are not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Recommended Operating Conditions
Table 6. Recommended Operating Conditions
Symbol
VDD
TA
Parameter
DC supply voltage
Commercial operating temperature.
Min.
2.5
–30
Typ.
2.5
24
Max.
3.3
+65
Max.
V
°C
All parameters are characterized for DC conditions after
thermal equilibrium has been established.
Unused inputs must always be tied to an appropriate logic
level, e.g., either VDD or GND.
DC Electrical Conditions
This device contains circuitry to protect the inputs against
damage due to high static voltages or electric fields; however
it is recommended that normal precautions be taken to avoid
application of any voltages higher than the maximum rated
voltages to this high-impedance circuit.
Table 7. DC Electrical Conditions
Symbol
Characteristic
Condition
Min.
Max.
Unit
VIH
Input high voltage
VDD-0.5
V
VIL
Input low voltage
–0.6
0.6
V
IIN
Input leakage current
VIN = VDD or GND
–10
+10
?A
VOH
Output high voltage
VDD=min; IOH= –100 mA
VDD-0.5
V
VOL
Output low voltage
VDD=min; IOH= 100 mA
0.5
V
IDD
Operating current
System clock <= 40 MHz
70
80
mA
Document Number: 001-02366 Rev. *D
Page 8 of 40
[+] Feedback