AK7755EN_16 Datasheet, PDF (41/109 Pages) Asahi Kasei Microsystems – DSP with Mono ADC Stereo CODEC + Mic/Lineout Amp

[AK7755]
CONT0A: CLK and SDOUT Output Setting
W R Name D7
D6
D5
D4 D3 D2
D1
D0
Default
CAh 4Ah CONT0A CLKOE BICKOE LRCKOE 0 0 OUT3E OUT2E OUT1E 00h
D7: CLKOE CLKO pin Setting
0: CLKO= “L” (default)
1: CLKO Output Enable
D6: BICKOE BICK pin Output Setting
0: BICKO= “L” (default)
1: BICKO Output Enable
This setting is invalid in Slave mode (CKM mode 2, 3, and 5 (CONT00: D6-D4)).
D5: LRCKOE LRCK pin Output Setting (Master Mode)
0: LRCKO= “L” (default)
1: LRCKO Output Enable
This setting is invalid in Slave mode (CKM mode2, 3 and 5).
D2: OUT3E
0: SDOUT3= “L” (default)
1: SDOUT3 Output Enable Valid when JX2E bit (CONT01: D7) = “0”
D1: OUT2E
0: SDOUT2= “L” (default)
1: SDOUT2 Output Enable Valid when JX3E bit (CONT05: D6) = “0”
D0: OUT1E
0: SDOUT1= “L” (default)
1: SDOUT1 Output Enable
Write “0” into the “0” registers.
CONT0B: TEST Setting
W R Name D7 D6 D5 D4 D3 D2
CBh 4Bh CONT0B 0 0 0 0 0 0
D1 D0 Default
0 0 00h
Write “0” into the “0” registers.
014006643-E-00
- 41 -
2014/10